Roofing Services

Roofing Maintenance for Tiled Roofs

Cement Work - Repairs - Chimney - Gable Ends - Valleys - Ridge Cap Tiles - New tile, felt and batten replacement system - Felt and batten patch repairs for tiled roofs.

Felt Support Tray

Roofing felt perishes over a period of time, and is at its most vulnerable at the lower end.. the eaves. This is where the felt can sag and water can collect, this is called 'ponding'. After some time the ponding effect causes the felt to rot and rupture, allowing the water to access the roof structure. The felt support tray, which is plastic, prevents this and it is rigid enough to prevent the overlapping felt to sag or pond and so avoids the natural breakdown process. This is the most cost-effective way of providing a complete and robust felt support system that will not deteriorate, giving additional protection to the fascia detail and is suitable for use with all slates and tiles.

Flat Roofing Replacement System

The new and improved 20 year lasting guaranteed techno torch felt for flat roofs. Techno torch is the UK’s leading bitumen torch on felt for flat roof surfaces, with its all weather resistance it is flexible, frost/heat resistant and 100% watertight. The age old solution to flat roof problems. Our simple cost effectice solution:

Remove all existing roof structure, report on existing board, replace where required, fit underlay roofing system, fit green mineral cap sheet giving a thickness of 8mm for a long lasting peace of mind with no nasty surprises. Fit and forget!

Fibreflex - A rubber based waterproof system for flat felt roofs

The ultimate protection. Fibreflex is a total roof coating waterproof system developed to refurbish failed industrial, commercial or domestic flat roofs. Brush applied as a semi liquid paste it dries to form an ultra tough, seamless, flexible overlay. Fibreflex can be applied during damp weather conditions and still provide a long term solution to waterproofing problems, including flat roof repair.

The simple one-coat all-weather application is heat, frost and moss resistant, flexible to prevent cracking and is immediately watertight. An inspection is carried out for any damage or leaks to the flat roofs surface, if so is repaired before applying Fibreflex.

Dry Verge System

Traditional mortar bedding is still the most widely used fixing method in England and Wales. compared to Scotland where currently 80% of all verges are mechanically fixed. However, the increased incidence of storms over the last few years has clearly highlighted the unreliability of mortar to secure the tiles. The switch to dry verge is gathering greater momentum every year. With all the advantages it is not difficult to see why.

British Standards state that no reliance should be placed on the sheer strength of mortar used in the filling and bedding. Mortar will eventually crack, in contrast, Universal Dry Verges are mechanically fixed and each unit individually screwed. With the next unit interlocking giving extra strength and hiding the screws offering the maximum protection against strong wind and water penetration giving you long term protection with a neat, attractive appearance and with none of the ongoing costs associated with mortar.

Dry Ridge System

With the Dry ridge kit You ridge tiles Will be maintenance free for life Each ridge tile is mechanically fixed removing The need for mortar making the rage much more secure.

Each dry verge cap interlocks with the last to create a strong weather proof barrier to protect against wind, snow, rain and frost. The application of dry verge caps will mean you never need to re-point again and they also add to the visual appeal of your property.


Services

  • Roofing
  • Exterior Painting & Decorating
  • Cleaing Services



Designed by Easyweb | All Rights Reserved © 2016 TG Contractors